Product Center
The company mainly produces silane-based pharmaceutical raw materials and pharmaceutical intermediates
3-(Trimethoxysilyl)propyl Methacrylate (stabilized with BHT)
| Product Type |
Pharmaceutical Customized Synthesis |
| Detail |
| Product name: |
3-(Trimethoxysilyl)propyl Methacrylate (stabilized with BHT) |
| CAS RN: |
2530-85-0 |
| SAFETY DATA SHEET: |
| 1、HAZARDS IDENTIFICATION |
| Classification of the substance or mixture |
PHYSICAL HAZARDS |
Not classified
|
| HEALTH HAZARDS |
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
|
| ENVIRONMENTAL HAZARDS |
Not classified
|
| Label elements |
Pictograms or hazard symbols |
 |
| Signal word |
Warning |
| Hazard statements |
Causes skin irritation
Causes serious eye irritation
|
Precautionary statements
[Prevention] |
Wash hands and face thoroughly after handling.
Wear protective gloves, eye protection
|
| [Response] |
IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice
or attention. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice or attention
|
| [Storage] |
|
| [Disposal] |
|
| 2、COMPOSITION/INFORMATION ON INGREDIENTS |
Substance/mixture: Substance
Components: 3-(Trimethoxysilyl)propyl Methacrylate (stabilized with BHT)
Percent: >98.0%(GC)
CAS RN: 2530-85-0
Synonyms: 3-(Methacryloyloxy)propyltrimethoxysilane (stabilized with BHT) , Methacrylic Acid
3-(Trimethoxysilyl)propyl Ester (stabilized with BHT)
Chemical Formula: C10H20O5Si
|
| 3、 PHYSICAL AND CHEMICAL PROPERTIES |
Physical state (20°C): Liquid
Form: Clear
Colour: Colorless - Almost colorless
Odour: Characteristic
pH: No data available
Melting point/freezing point: No data available
Boiling point/range: 110°C /0.7kPa
Flash point: 92°C
Flammability or explosive
limits:
Lower: 0.9%
Upper: 5.4%
Vapour pressure: 1.3kPa/130°C
Relative density: 1.05
Solubility(ies):
[Water] Insoluble
[Other solvents]
Soluble: Methanol, Ether, Benzene, Acetone
Autoignition temperature: 265°C
|
| 4、STABILITY AND REACTIVITY |
Chemical stability: Polymerization may occur under the influences of heat, light or on contact with
polymerization initiators such as peroxides etc.
Possibility of hazardous
reactions:
No special reactivity has been reported.
Conditions to avoid: Heat, Light
Incompatible materials: Oxidizing agents, Strong acids, Strong bases, Metals
Hazardous decomposition products:Carbon dioxide, Carbon monoxide, Silicon oxides
|
|
