Product Center
The company mainly produces silane-based pharmaceutical raw materials and pharmaceutical intermediates
2-Methyltetrahydrofuran (stabilized with BHT)
| Product Type |
Pharmaceutical Customized Synthesis |
| Detail |
| Product name: |
2-Methyltetrahydrofuran (stabilized with BHT) |
| CAS RN: |
96-47-9 |
| SAFETY DATA SHEET: |
| 1、HAZARDS IDENTIFICATION |
| Classification of the substance or mixture |
PHYSICAL HAZARDS |
Flammable liquids Category 2 |
| HEALTH HAZARDS |
Acute toxicity (Dermal) Category 5
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2B
|
| ENVIRONMENTAL HAZARDS |
Not classified |
| Label elements |
Pictograms or hazard symbols |
  |
| Signal word |
Danger |
| Hazard statements |
Highly flammable liquid and vapour
May be harmful in contact with skin
Causes skin irritation
Causes eye irritation |
Precautionary statements
[Prevention] |
Keep away from heat, sparks, open flames and hot surfaces. -No smoking.
Keep container tightly closed.
Ground and bond container and receiving equipment.
Use explosion-proof electrical, ventilating and lighting equipment. Use only
non-sparking tools. Take precautionary measures against static discharge.
Wash hands and face thoroughly after handling.
Wear protective gloves, eye protection |
| [Response] |
IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice
or attention. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice or attention.
Call a POISON CENTER or doctor if you feel unwell.
In case of fire: Use dry chemical, dry sand or foam to extinguish. |
| [Storage] |
Store in a well-ventilated place. Keep cool. |
| [Disposal] |
Dispose of contents and container in accordance with local, regional, national
regulations. |
| 2、COMPOSITION/INFORMATION ON INGREDIENTS |
Substance/mixture: Substance
Components: 2-Methyltetrahydrofuran (stabilized with BHT)
Percent: >98.0%(GC)
CAS RN: 96-47-9
Synonyms: Tetrahydro-2-methylfuran (stabilized with BHT)
Chemical Formula: C5H10O |
| 3、 PHYSICAL AND CHEMICAL PROPERTIES |
Physical state (20°C): Liquid
Form: Clear
Colour: Colorless - Almost colorless
Odour: No data available
pH: No data available
Melting point/freezing point: No data available
Boiling point/range: 78°C
Flash point: -11°C
Flammability or explosive
limits:
Lower: 1.5%
Upper: 8.9%
Relative density: 0.86
Solubility(ies):
[Water] No data available
[Other solvents] No data available
Log Pow: 1.26
Autoignition temperature: 270°C |
| 4、STABILITY AND REACTIVITY |
Chemical stability: Stable under proper conditions.
Possibility of hazardous
reactions:
No special reactivity has been reported.
Conditions to avoid: Spark, Open flame, Static discharge
Incompatible materials: Oxidizing agents
Hazardous decomposition products:Carbon dioxide, Carbon monoxide |
|
