Product Center
The company mainly produces silane-based pharmaceutical raw materials and pharmaceutical intermediates
3-[Dimethoxy(methyl)silyl]propyl Methacrylate
Product Type |
Pharmaceutical Customized Synthesis |
Detail |
Product name: |
3-[Dimethoxy(methyl)silyl]propyl Methacrylate |
CAS RN: |
14513-34-9 |
SAFETY DATA SHEET: |
1、HAZARDS IDENTIFICATION |
Classification of the substance or mixture |
PHYSICAL HAZARDS |
Flammable liquids Category 4
|
HEALTH HAZARDS |
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
|
ENVIRONMENTAL HAZARDS |
Not classified
|
Label elements |
Pictograms or hazard symbols |
|
Signal word |
Warning |
Hazard statements |
Combustible liquid
Causes skin irritation
Causes serious eye irritation
|
Precautionary statements
[Prevention] |
Keep away from flames and hot surfaces. – No smoking.
Wash hands and face thoroughly after handling.
Wear protective gloves, eye protection.
|
[Response] |
IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice
or attention. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical advice or attention.
In case of fire: Use dry chemical, dry sand or foam to extinguish
|
[Storage] |
Store in a well-ventilated place. Keep cool
|
[Disposal] |
Dispose of contents and container in accordance with local, regional, national
regulations |
2、COMPOSITION/INFORMATION ON INGREDIENTS |
Substance/mixture: Substance
Components: 3-[Dimethoxy(methyl)silyl]propyl Methacrylate
Percent: >98.0%(GC)
CAS RN: 14513-34-9
Synonyms: Methacrylic Acid 3-[Dimethoxy(methyl)silyl]propyl Ester
Chemical Formula: C10H20O4Si
|
3、 PHYSICAL AND CHEMICAL PROPERTIES |
Physical state (20°C): Liquid
Form: Clear
Colour: Colorless - Almost colorless
Odour: No data available
pH: No data available
Melting point/freezing point: No data available
Boiling point/range: 71°C /0.1kPa
Flash point: No data available
Flammability or explosive
limits:
Lower: No data available
Upper: No data available
Relative density: 1.00
Solubility(ies):
[Water] No data available
[Other solvents] No data available
|
4、STABILITY AND REACTIVITY |
Chemical stability: Polymerization may occur under the influences of heat, light or on contact with
polymerization initiators such as peroxides etc.
Possibility of hazardous reactions:
No special reactivity has been reported.Conditions to avoid: Heat, Open flame, Light
Incompatible materials: Oxidizing agents
Hazardous decomposition products:Carbon dioxide, Carbon monoxide, Silicon oxides
|
|